WELCOME TO SCORPIO PRECISIONS

Scorpio Precisions aims to be the Preferred supplier of world class Seals and other accessories for Oil & Gas, Chemical & Process industries and Precision Machined parts to all other sectors.

An ISO-9001-2015, registered unit exclusively engaged in the metal ring joint and other nonstandard gaskets manufacturing since 2001. Having highly skilled and dedicated and experienced team to supply world class Standard and non-standard metal seals and engineered components in swift time. Excellent knowledge in manufacturing special seals according to customer requirement covering all exotic materials.

Having in house facility to manufacture seals (RTJ) ranging from 10 mm to 1100 mm, We are equipped with the following:

Our Specialties

AX, VX, IX, Lens, Bonnet and other non-standard engineered Gaskets and seals. Specialists in Forging & Ring Rolling and Machining of Nickel Alloys, Super Duplex, SMO, Monel etc., Scorpio manufactures and distributes a wide range of gaskets for the Oil and Gas, Power Generation and Petrochemical industries. With extensive stock and a substantial range of in-house manufacturing capabilities right from Billets to Final gaskets. Scorpio is fully equipped to provide our customers with all of their gasket and sealing requirements.

  • image
  • image
  • image
  • image
  • image
  • image
  • Ring Joint Gaskets
  • Kammprofile Gaskets
  • Spiral Wound Gaskets
  • Flange Insulation Kits
  • Precision Engineered Gaskets

Ring Joint Gaskets are designed to seal by "initial line contact" or wedging action between the mating flange and the gasket. By applying pressure on the seal interface through bolt force, the softer metal of the gasket flows into the micro-fine structure of the harder flange material, creating a very tight and efficient seal.

Types

R-Oval

Style R ring joint gaskets are manufactured in accordance with both API 6A and ASME B16.20 size/ratings. Available in both oval and octagonal configurations, both types are interchangeable on modern octagonal type grooved flanges. Style R Ring Joint gaskets can be manufactured in accordance with all relevant standards to suit the following flange designations: API- 6A, ASME/ANSI B16.5, MSS SP44 (ASME B 16.47 Series A) & BS 1560.

R-Octagonal

Style R octagonal ring joint gaskets are manufactured in accordance with both API 6A and ASME B16.20 size/ratings. Available in both oval and octagonal configurations, both types are interchangeable on modern octagonal type grooved flanges. Style R Ring Joint gaskets can be manufactured in accordance with all relevant standards to suit the following flange designations: API- 6A, ASME/ANSI B16.5, MSS SP44 (ASME B 16.47 Series A) & BS 1560.

RX

Style RX ring joint gaskets are a pressure-energised adaptation of the standard Style R gasket. The RX is designed to fit the same groove design as a standard Style R, making the joints interchangeable. The modified design uses a pressure-energised effect that improves the efficiency of the seal as the internal pressure of the system increases.

BX

Style BX ring joint pressure energised gaskets are manufactured in accordance with API 6A and are designed for use on pressurised systems up to 20,000 PSI. When correctly fitted, the style BX gasket allows virtual surface-to-surface contact of the flange faces, which means that the gasket is fully trapped on both the inner and outer diameters. All BX gaskets incorporate a pressure balance hole to ensure equalisation of pressure that may be trapped in the grooves.

Kammprofile Gaskets are manufactured utilising a precision machined serrated insert sealing element with V-like cut grooves designed to entrap a sealing compound to create many individual seals across the face of a flange. The sealing element can be used stand alone in the case of a tongue and grove application or can incorporate a centering ring, either fixed or loose depending on the specific application.

Types

Kammprofile Style L

Kammprofile Style L profiled gaskets are commonly used for applications involving gaseous materials and high temperature differences in the inner and outer rings.

Kammprofile Style TG

Kammprofile Style TG profiled gaskets are most often used with tongue and groove and male and female flanges.

Kammprofile Style F

Kammprofile Style F profiled gaskets are made for flat or raised face flanges and designed with built in centering rings.

Spiral Wound Gaskets are made of a preformed thin metallic strip combined with a soft sealing composite material, wound together under pressure to energise the sealing element to act like a spring when compressed between two flange faces. The sealing element can be used standalone or in conjunction with inner and/or outer rings depending on the application. Spiral wounds are available in a full range of styles and materials and are manufactured in accordance with ASME B16.20 for use in all industry flanges, including ASME/ANSI B16.5, ASME B 16.47, Series A & B.

Types

Style S - Sealing Element

Designed for tongue and grove applications, the style S gasket is a standalone sealing element where the ID is reinforced with several layers of metal winding, filler material is then introduce to offer greater sealing ability and the gasket is finished with several more layers of metal to help insure stability.

Style SI - Sealing Element with Inner Ring

The SI configuration is the same as the S except that a solid inner ring is utilised to prevent over compression. This design is also helpful in turbulent applications which are prone to cause erosion of the flange faces.

Style CS - Centering Ring with Sealing Element

The CS gasket utilises an external ring where the ID is grooved to insert a sealing element. The external ring or centering ring is designed to properly guide the gasket on a bolted flange accurately centering gasket. The Centering also provides additional radial strength to prevent gasket blowout and acts as a compression limiter.

Style CSI - Centering Ring with Sealing Element and Inner Ring

The CSI gaskets is best suited where high pressure and temperature is a factor or in applications where corrosive or toxic media maybe present. Like the CS profile, the CSI gasket includes an inner ring which has proven to be very helpful to eliminate inward buckling of the sealing element.

Flange insulating sets are packaged for one flanged joint, including gasket, sleeves and washers. Each flange set is securely packaged in a cardboard box, clearly labelled as to size, ASA Rating, style and material. Either polyethylene or phenolic sleeves are available with these insulating sets. Polyethylene sleeves are standard and will be furnished unless otherwise specified.

Types

Type D

(API Ring Joint) - gaskets are insulating ring joint gaskets made to fit the ring groove of Ring Type Joint flanges. The Type D central gasket is made of medium weave fabricreinforced phenolic, manufactured to ASA (ANSI) gasket dimensions. Properties are similar to those of phenolic flat central gaskets and are available in the basic octagonal shapes. Oval shapes can be ordered by special request. When installing Type D gaskets, it is also recommended that tape be wrapped around the outside of the flange to prevent foreign material from lodging between the exposed portions and causing "shorting out" of the flanges. Alignment pins should be used whenever possible to assure proper alignment of flanges when installing all flange insulation sets. Pins should be a minimum of 3/32" (2.38mm) larger than the bolt size.

Type E

(Full Face) - gaskets are designed for full protection of flanges and have the same outside diameter as the flange. Each gasket has precision-located bolt holes. Upon installation, it is recommended that tape be wrapped around the outside of the flange to prevent foreign material from lodging between the exposed portions and causing "shorting out" of the flanges. All Type E gaskets are easily centered with the flange inside diameter. Gaskets with slightly larger outside diameters are available on request.

Type F

(Ring) - gaskets are designed to fit the raised face portion of flanges. The outside diameter of the gasket is slightly smaller than the inside diameter of the bolt hole circle. The outside diameter is designed for alignment by the insulating sleeves. The central gaskets are available in the same materials as Type E. Upon installation, it is recommended that tape be wrapped around the outside of the flange to prevent foreign material from lodging between the exposed portions and causing "shorting out" of the flanges.

Precision engineered gaskets and seals are critical components used in both subsea and surface applications. Predominately, these parts are manufactured from all types of steels, stainless steels and high nickel alloys and are manufactured to very strict tolerances. These seals are made through state-of-the-art CNC Machines with experienced technicians at our integrated Gasket manufacturing plant.

Types

SBX

Ring type joints SBX are used on subsea assembly with flanges API 6BX, API 17SS and API 17SV. They can seal up to 5,000 PSI, according to API 17D for 17SS flanges and up to 10,000 PSI, according to API 17D for 17SV flanges.

SRX

Ring type joints SRX are used on subsea assembly with flanges API 17D - offshore, type 17SS and 17SV. They can seal up to 5,000 PSI, according to API 17D for 17SS flanges.

AX

Ring type joints AX are used in H4 hydraulic connectors - subsea production equipment such as BOP or underwater Christmas tree.

VX

Ring type joints VX are used in H4 hydraulic connectors - subsea production equipment such as BOP or underwater Christmas tree.

VX-HP (High Pressure)

Ring type joints VX are used in H4 hydraulic connectors - subsea production equipment such as BOP or underwater Christmas tree. Manufactured to perform under deep water of up to 4,000 meters (13,000 feet) depth.

© 2018 SCORPIO PRECISIONS DEVELOPED BY SWAN WEB SOLUTION